# DIREWOLF - Igate & Digipeater

#### [https://k5eok.org/2021/01/19/aprs-digipeater-igate-with-direwolf-entry-level/](https://k5eok.org/2021/01/19/aprs-digipeater-igate-with-direwolf-entry-level/)

#### [https://packet-radio.net/direwolf/](https://packet-radio.net/direwolf/)

#### [https://www.f8eby.org/blog/index.php/tag/direwolf/](https://www.f8eby.org/blog/index.php/tag/direwolf/)

##### Youtube : [https://www.youtube.com/watch?v=AYhVDgRJBNw](https://www.youtube.com/watch?v=AYhVDgRJBNw)

---

#### ***Transformer une radio non APRS en station APRS sous windows avec direwolf***

Transformer une radio non APRS en station APRS sous windows  
  
1\) Télécharger direwolf [https://github.com/wb2osz/direwolf/releases](https://github.com/wb2osz/direwolf/releases)  
GitHub  
Releases · wb2osz/direwolf  
Dire Wolf is a software « soundcard » AX.25 packet modem/TNC and APRS encoder/decoder. It can be used stand-alone to observe APRS traffic, as a tracker, digipeater, APRStt gateway, …  
  
2\) Dézipper le fichier .zip  
  
Editez direwolf.conf  
a. Ligne 167 entrez votre indicatif. Évitez les indicatifs de plus de 6 caractères qui ne sont pas supporté par certains clients APRS. Ajoutez un SSID si nécessaire.  
b. (opt) Ligne 90 éditez vos paramètres audio si nécessaire. Par défaut direwolf utilise le périphérique audio par défaut.  
  
3\) Lancer direwolf.exe et autorisez l’accès au pare feu

  
4\) Téléchargez un client APRS. J’utilise YACC [https://sourceforge.net/projects/yetanotheraprsc/](https://sourceforge.net/projects/yetanotheraprsc/)

  
5\) Dézipper le fichier

  
6\) Lancer YAAC.jar, autoriser l’application dans le pare feu

  
7\) Rentrer le MÊME indicatif et SSID que celui que vous avez utilisé dans direwolf

[![unknown-1.png](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/scaled-1680-/6lPmbRqI3J1USl3a-unknown-1.png)](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/6lPmbRqI3J1USl3a-unknown-1.png)

8\) Rentrer son type de station, son symbole sur la carte, puis renseignez vos coordonnés GPS  
  
9\) Ajoutez une interface de type AGWPE  
  
10\) Remplissez les champs demandés : Hôte localhost, Port 8000, Transmission activé

[![unknown-2.png](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/scaled-1680-/pDiZN5OjMKZTRTsV-unknown-2.png)](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/pDiZN5OjMKZTRTsV-unknown-2.png)

11\) Bien cocher la case pour activer le beacon et personnaliser le texte du beacon

[![unknown-3.png](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/scaled-1680-/ygB5t3niHxEwj1bk-unknown-3.png)](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/ygB5t3niHxEwj1bk-unknown-3.png)

12\) Cliquez sur le bouton BCN, une trame APRS est envoyé  
  
13\) profit

[![Tuto-aprs-1024x536.png](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/scaled-1680-/KwY1Woydxj2qzGnq-tuto-aprs-1024x536.png)](https://doc.techteam-yvl.com/uploads/images/gallery/2023-03/KwY1Woydxj2qzGnq-tuto-aprs-1024x536.png)

Tutoriel proposé et créé par F4IQN Maxime, merci à lui.